And with our right hand we will cover holes four and five and the sixth hole that is forked will be partially covered leaving the smaller hole free.

The note G sharp is enharmonic of the note A flat, so you must know how to write both of them on the stave.

The note G sharp is written on the second line with its corresponding sharp sign in front.

We hope this article has been helpful, leave us any comments you may have.

View Songs

The post G Sharp on Recorder appeared first on Recorder Notes.

Therefore, we must keep in mind that we will be using this note frequently so it is best to learn it as soon as possible.

When we play in the key of D Major we must also know the notes, F sharp and C sharp.

A good option to practice this note is to try to play any song that is in the key of G Major or D Major.

How to play F sharp on recorder

To play F sharp with our recorder we must cover with our left hand all the holes including the back hole and with our right hand we will only cover holes 5 and 6.

You will get the F sharp, this note is the enharmonic of the note G flat.

Notice how it is also written on the stave, in the first space and with its corresponding sharpened sign.

The post F Sharp on Recorder appeared first on Recorder Notes.

We have to keep in mind that the note D sharp is in enharmonic with the note E-flat. Therefore we should write the notes even if the position of the fingers is the same.
Well, let’s start..

How to play D sharp on the recorder

As you can see in the diagram of the recorder, to play this note we will have to cover all the holes in our recorder with our left hand and with our right hand we will cover the three holes 4, 5, and 6 and lift the little finger from the sixth bifurcated hole we have.

And that’s how we get the D-sharp on our flute. Notice how this is written is not on the stave. The sharp notes must have the sharp sign in front

The post D Sharp on Recorder appeared first on Recorder Notes.

Today’s recorders are prepared with smaller holes in order to achieve this type of altered notes.

Yamaha recorders are ideal for this

Then, to get the C sharp on recorder we have to cover the 6 upper holes and the last one we are going to cover just a little bit.

This will make us get the C sharp because with just lifting the finger a little we go from the note C to the note C sharp.

Remember that the back hole must also be covered.

Look at this recorder fingering that explains perfectly how to do C sharp on a recorder.

Well, I hope you’ve learned how the play C sharp is on the recorder, this is the low note because there is a high C sharp on the recorder too, but we’ll study that one separately.

You can also see how it is written on the stave, note that C sharp is the same note as D flat

The post C Sharp on Recorder appeared first on Recorder Notes.

Pay attention to the steps to follow to get the note A sharp on the recorder.

As you can see, to get the A sharp on recorder we must cover the following holes:

• With our left hand we will cover the corresponding holes of the index and ring fingers.
• With our right hand we will cover with the middle and ring fingers.
• The back hole of the recorder will also be covered.

Well, that’s how we get the A sharp note, on a soprano recorder, easy, isn’t it?

Here is the fingers chart:

Notice how this note is represented in the stave, in the second space and with a sharp.

In the Anglo-Saxon nomenclature, the note is called “A#”.

The post A Sharp on Recorder appeared first on Recorder Notes.